Getting Started
with AVEVA E3D
Functions : Functions : AVEVA E3D™
AVEVA E3D™ consists of the following modules:
|
•
|
|
•
|
|
•
|
|
•
|
For a full range of products in the software suite, refer to Product Range for further information
All parts of the design (including equipment, and piping and structural steelwork layouts) can be created. Component selection is provided through Specifications that dictate which Catalogue Components can be used. Each part of the design model can be displayed in colour-shaded ‘solid’ colour-coded representations for ease of interpretation.
SPOOL is used for pipework spooling, it allows the designer to split the pipework design into logical sections (spools) ready for fabrication. The spool data can then be output as isometric drawings using ISODRAFT, refer to Spooling for further information.
DRAW enables dimensioned and annotated scale drawings of selected parts of the design model to be produced. All information needed to create the drawing is accessible using a single drawing database, which extracts data to be used for dimensioning directly from the MODEL database.
A design model 3D view can be previewed in DRAW to aid assembly of a drawing in the 2D view, refer to Introduction for further information.
ISODRAFT produces automatically annotated and dimensioned piping isometric drawings, with associated material lists, of specified sections of the pipework. The content and style of the drawings can be chosen to suit the needs of pipe fabricators and/or erectors and can include a wide range of optional features to suit local requirements. Refer to Introduction for further information.
