ISODRAFT Reference Manual
Command Reference Section : Alphabetical Command Reference : SIZE
SIZE
 
Function:
Specifies the overall dimensions of the drawing sheet.
Description:
The SIZE command allows the user to specify the dimensions of the drawing sheet; either in current or specified units, or as a standard ISO or American drawing sheet size. The default is ISO A2.
ISODRAFT will subtract the current margins and reserved area (if any) before laying out the isometric plot, the material list, frame and title block in the remaining area of the sheet.
Examples:
SIZE A3
Specifies ISO A3 size.
 
SIZE AA
Specifies American A size
 
SIZE H 300 W 400
Specifies dimensions 300mm high x 400mm wide (assuming current units are mm).
Related Commands:
MARGIN RESERVE
Command Syntax:
 
 
>--- SIZE ---+--- AA ---.
             |          |
             |--- AB ---|
             |          |
             |--- AC ---|
             |          |
             |--- AD ---|
             |          |
             |--- AE ---+---------------------------------.
             |                                            |
             |--- A --- integer --------------------------|
             |                                            |
             |--- Height --- value --- Width --- value ---|
             |                                            |
             ‘--- Width --- value --- Height --- value ---+--->
Restrictions:
Standard ISO sizes, as defined by integer, must be in the range A0 to A4.
Querying:
Q SIZE
Q OPTions
1974 to current year. AVEVA Solutions Limited and its subsidiaries. All rights reserved.
AVEVA Logo