ISODRAFT Reference Manual
Command Reference Section : Alphabetical Command Reference : RESERVE
RESERVE
 
Function:
Allows the user to specify a blank area at the bottom of the drawing area or the Material list.
Description:
The user can reserve an area at the bottom of the drawing area or Material list, which will be left blank when the isometric is plotted.
Note:
If the user wants a blank area across the whole sheet, not just the drawing area, use the MARGIN command to specify a large bottom margin.
A reserved area can be used for standard notes, detail PLOT files, a company name, etc. or it can be filled by information on a backing sheet using the UNDERLAYPLOT command.
The default is a reserved height of zero; that is, no reserved area.
Examples:
RESERVE 30
Reserves an area 30 units high across the drawing area.
RESERVE 2 INCH
Reserves an area 2 inches high across the drawing area.
RESERVE MAT 30
Reserves an area 30 units high across the bottom of the Material list
Related Commands:
MARGIN
Command Syntax:
>--- REServe -+-- <uval> --------------------.
              |                              |
              ‘-- MATeriallist --- <uval> ---+--->
Querying:
Q REServe
Q OPTions
1974 to current year. AVEVA Solutions Limited and its subsidiaries. All rights reserved.
AVEVA Logo