ISODRAFT Reference Manual

Function:	Defines the style in which attributes are output on the isometric drawing area. The user can also output the P3 directions of FTUB elements.
Description:	The user can output piping component attributes and user-defined attributes on the isometric drawing area. The user can choose whether the text is boxed or unboxed, and the style of box used. The user can also output empty boxes for manual mark-up. Six styles are available:
	• A rectangular box with straight ends • A rectangular box with angled ends • A rectangular box with round ends • A triangular box • A diamond-shaped box • Unboxed
Examples:	OUTC NAME SHOP :UDA1 ON INST ELBO PCOM WITH STR Positions the attribute values for NAME, SHOP and the UDA values for UDA1 as straight edged boxed comments on all Instruments and Pcoms. The box leader line points to the centre of the component.
	OUTC SHOP OFF Switches off the output of the SHOP attributes for all components.
	OUTC BLANK 6 ON BEND WITH ANGL Outputs an empty angled-edge box on all bends with space for 6 text characters.
	OUTC NAME ON ELBO OFF Switches off output of the NAME attribute on ELBOWS. OUTC P3DIRF WITH STRAIGHT Outputs P3 directions for FTUB as a straight edged box.
Restrictions:	• Triangular boxes will have a limit of two characters. • Diamond boxes will have a limit of three characters. • Unset attributes will not be output. • Warnings are not output for unset or nonexistent attributes. • Empty boxes which are drawn as unboxed will not be shown.
Command Syntax:
.-----<-----.              /            | >- OUTCom -*- attribute  -+             |             |             |- P3DIRFtub -+----------------.             |             |                |             |-------------+- ON component -+- WITH --.             |             |                |         |             |             |                |---------+- BOXStyle style ---.             |             |                |                              |             |             ‘----------------+- OFF ------------------------|              |                                                             |             ‘-  OFF  -----------------------------------------------------+->

where attribute is one of the following:
NAME	OWNER	POSItion	ORIentation	SPREf
LSTUbe	BUILt	SHOP	ISPEc	TSPEc
ANGLe	HEIGht	RADIus	LOOSe	LOFFl
ALLOwance	CREF	CRFA	CSTReLAXEs
ATTYp	SPLN	SPLT	LEND	TYPE
BLANK n	:udaname	:udaname	NUMBER integer
where :udaname NUMBER integer outputs a single element of a UDA array.
component is one of the following:
BEND	ELBOw	CAP	CLOSure	COUPling
CROSs	FBLInd	FLANge	FTUBEINSTrument
LJSEnd	OLET	TEE	PCOMPonent	REDUcer
SHU	TRAP	UNIOn	VALVe	VFWAy
VTWAy	WELD	GASKet	SUPPort	ALL
style is one of the following:
STRaight	ANGLed	ROUNd	TRIangular	DIAMond

Querying:	Q OUTCom Lists all attributes output. Q OUTCom attribute Lists information about the named attribute. Q OUTCom BLANK Lists all blank lengths output, e.g. 6, 8, 12.
	Q OUTCom BLANK n Lists information about the blank of given length. Q OUTCom UDA Lists the names of all UDAs output.
	Q OUTCom :udaname Lists information for the named UDA. Q OUTCom :udaname NUMBer integer Lists information about the given element of a UDA array.
	Q OUTCom PTDIRF Lists information about tagging P3 directions on FTUBs. Q OPTIONS Lists all options set.
	Note: The following queries are for application work only, and should not be used in normal program use. Triplets are a combination of attribute, component and boxstyle:
	Q OUTCom TRIPlets Lists the number of triplets. Q OUTCom TRIPlets n Lists the details (component/attribute/ boxstyle) of triplet number n.
	Q OUTCom BLANKTRIPlets Lists the number of blank triplets. Q OUTCom BLANKTRIPlets n Lists the details (component/number of characters/boxstyle) of blank triplet number n