ISODRAFT Reference Manual
Command Reference Section : Alphabetical Command Reference : LEGLENGTH
LEGLENGTH
 
Function:
Allows the user to specify the plotted leg length of elbows, tees and crosses.
Description:
By default, the plotted leg length of Elbows, Tees and Crosses is 9mm. If necessary the user can change this value. The minimum leg length allowed is 6mm. If the user specify a smaller value than this, ISODRAFT will give the message
Leglength set to minimum value of 6mm
Examples:
LEGLength 12
Command Syntax:
>--- LEGLength --- <uval> --->
Querying:
Q LEGLENGTH
Q OPTIONS
1974 to current year. AVEVA Solutions Limited and its subsidiaries. All rights reserved.
AVEVA Logo