ISODRAFT Reference Manual
Command Reference Section : Alphabetical Command Reference : CHARHEIGHT
CHARHEIGHT
 
Function:
Specifies the character height to be used for annotating text on drawings.
Description:
The CHARHeight command defines the height of characters used on isometric drawings.
This command does not affect characters: on the material list, which are controlled by the MATERIALLIST CHARHeight command; weld numbers or characters in the title block and frame.
Example:
CHARH 2.0
corresponds to 2.0mm
CHARH 0.125 INCH
corresponds to 1/8 inch
Command Syntax:
>--- CHARHeight - value ----->
Querying:
Q CHARHeight
Q OPTions
1974 to current year. AVEVA Solutions Limited and its subsidiaries. All rights reserved.
AVEVA Logo