Customising the Drawing Sheet

ISODRAFT Reference Manual

Command Reference Section : Command Summary : Customising the Drawing Sheet


COMMAND	Brief description
ATEXT	Allows the user to change the standard text on isometric drawings.
CUTMARKS	Draws cut marks at each corner of the overall drawing sheet.
DATE	Allows the user to specify the format for showing the date in the drawing’s title block.
DISTANCES	Allows the user to specify the units to be used for input of lengths and distances.
FRAME	Specifies whether or not drawing frame lines and text are drawn.
ISO	Defines the view direction to be used for generating the isometric plot.
ISOTYPE	Defines whether the isometric will show fabrication information, erection information or both.
MARGIN	Specifies the width of the margin on each side of the drawing.
MARK	Allows the user to define whether the pipe revision attribute (REV) should be incremented and the Branch detail attribute should be set to true after successful detailing.
PLOTDETAILDATA	Allows the user to define whether and how to display parameterised attribute data in the detail PLOT files.
PLOTTINGSCALE	Defines the scale of the plot independently of the drawing sheet size.
POSITION	Allows the user to create tables of standard text annotations or pipe attributes.
PROJECTNUMBER	Writes the project number into the title block area.
RESERVE	Allows the user to specify a blank area at the bottom of either the drawing or material list areas.
SIZE	Specifies the overall dimensions of the drawing sheet.
STACKINGARRANGEMENT	Allows the user to define how to position multiple plots on a single sheet.
TEXTPOSITION	Allows the user to create tables of standard text annotations or pipe attributes.
TITLEBLOCK	Allows the user to add extra text to the title block.
UNDERLAYPLOTNAME	Allows the user to define a background PLOT file; letting the user plot directly on top of this background plot.