HVAC
Administrator Guide
User Definable Joints Set
: Male/Female Socket & Spigot Joints (Lap Joints) Example
Male/Female Socket & Spigot Joints (Lap Joints) Example
As an example of how the user defined joints can be easily manipulated, consider Male/Female Socket & Spigot joints, often referred to as lap joints:
Assuming the collar is fixed to the Female end in the workshop.
Set the Joint to FEMA on the detailing spec joints
At creation time the application then selects a male after each female.
The above does not show the collar thickness. (Default)
So without the green line outline the joint just looks like a butt joint
It is possible to show a collar by setting the
/AVEVAHVACCATA-Joints-RECT/FEMA/HVJA PPRO ( 100 )
/AVEVAHVACCATA-Joints-RECT/FEMA/HVJB PPRO ( 3 )
The above selection was from the Choose Joint which you can see gives you Male/Female Socket and Spigot description.
Note:
It must be clear how to interpret the length of each piece because Length= PA to PL but you want 50mm male insert extra.
1974 to current year.
AVEVA Solutions Limited and its subsidiaries. All rights reserved.
