Attribute Category: Cabling

Data Model Reference Manual

Pseudo Attributes : Attribute Category: Cabling

Attribute Category: Cabling

Arriving cables to attached point

List of elements connected to attachment

Arrive Y axis direction

Obtains an ordered array of radii which a particular cable uses from head to tail

Calculated box volume in world coordinates

cable interference class

Defines laying method for cables inside the branch. Attribute on %CWAY has no effect on functionality – it's used only to cascading down to CWBRAN during creation of new CWBRAN.

Accumulated cables xarea at route node

Cable centre of gravity

Cut Length of cable

Free Length of cable

Geometric Length of cable

Cables at a point on a cableway

References to POINTR forming route of a cable

List of route nodes that cable passes

List of route nodes and rattas that cable passes

Raw Geometric Length of cable

Cable status text

Total Length of Cable

Returns the centre radius of CWBRAN volume at this particular point

Centreline Radius

Fill level check

Fill level at route node

All cables attached to route node

Calculate maximum fill level on cway

Calculate minimum fill level on cway

List of attachment connected to attachment

List of branches connected to branch

Segment end connection flag

Segment start connection flag

Position consistency

List of trays connected to branch

Cableway branches and junction boxes list

Cable Way Justification Line

All cableways attached to route node

Cableway branches and pull pits and junction boxes list

Cableway branches and pull pits list

List of elements connected to branch tail

Return value of radius at POINTR used to select correct specification component:

•

Always inside radius at bends

•

Inside or outside radius at risers *(depending whether riser is Inside/Outside)

Return reference from CABLE element to ELCONN element

Centre of fillet arc

Fillet arc position

Sorted references to attachment points with ascending order of fill level greater then 0

Fill level at route node

Middle point of fillet arc

Fillet start position

List of elements connected to branch head

List of attachment connected to attachment

Getting installation method lengths. The output is a textual array describing length of installation method along the cable. Size of the array depends on how many different installation methods are applied along the cable route.

Returns the smallest radius of CWBRAN at this particular point

Getting installation level and dressing. The output is a textual array of 5 elements as follows:

•

Free Route, <length>

•

length of the part of the cable that is routed outside branch

•

Underground Dressed, <length>

•

… inside *underground dressed branch

•

Underground Not Dressed, <length>

•

...inside underground undressed branch

•

Above Ground Dressed, <length>

•

...inside above ground dressed branch

•

Above Ground Not Dressed

•

...inside above ground dressed branch

Note:

*underground – is determined by attribute UNDERG queried on the branch

Returns true if cable uses a radius smaller than minimum radius for it's specification (see property MINBEN)

Junction boxes list

List arriving leaving cables on attached point

Leave Y axis direction on point

Min Fill level on Cableway and Cabletray components

All NATPs attached to route node

Number of cores in a cable

Returns the biggest radius of CWBRAN at this particular point

Cableway profile element

Cableway profile obstructions

Obtains the radius of a cable at this particular point

List of valid connected route attachments

Route information list

Scans all the routing points the cable is routed through and returns the minimal radius of the cable

Cable Way Justification Line

List of elements connected to branch tail

List of attachment connected to attachment

Total Cableway X-area

Cableway radius

1974 to current year. AVEVA Solutions Limited and its subsidiaries. All rights reserved.