Moving to a Vertical Clearance

Model Reference Manual

Equipment and Primitives : Moving to a Specified Clearance between Items : Moving to a Vertical Clearance

This command moves the Current Element until its volume is a specified vertical clearance above or below a fixed element, Point or position.


Example:
MOVE ALONG U30W CLEAR ONTO /BEAM	The Current Element will be moved vertically until it is zero clearance above /BEAM (see Figure 7:32.: Moving to a given vertical clearance in a specified direction).
MOVE E60D CLEAR 1000 UNDER PIN6	The Current Element will be moved E60D until it is 1000 below the specified Design point (see Figure 7:33.: Moving to a given vertical clearance).

Command Syntax:

>- MOVe -+- ALOng -.
         |         |
         ‘---------+- <bdir> CLEArance <uval> -+- UNDer -.
                                               |         |
                                               ‘- ONTop -+-  <gid> --.
                                                         |           |
                                                         |- <marke> -|
                                                         |           |
                                                         ‘- <bpos> --+->

Querying:

>-- Query POSition --+-- <bpos> --.
                     |            |
                     ‘------------+-- WRT --.
                                  |         |
                                  |-- IN ---+-- <gid> -->
                                  |
                                  ‘-->

Figure 7:32.

Moving to a given vertical clearance in a specified direction

Figure 7:33.

Moving to a given vertical clearance