Catalogues and Specifications
Reference Manual
Catalogue Database Elements Setup in PARAGON : Bolting Tables
The Bolt Table hierarchy contains information describing the nature of the bolted connections of Piping Components in a project. Although the Bolt Table is part of the Catalogue database, and so must be set up using PARAGON, it has been designed for the exclusive use of ISODRAFT and so is described in detail in the ISODRAFT Reference Guide; only a summary is presented here. Element creation and attribute setting is done in the usual way.
|
•
|
BTSE - the Bolt Set is the administrative element for catalogue component bolting information. It owns Bolt P-point (BLTP) elements.
|
|
•
|
BLTP - the Bolt P-point stores the bolting information for an individual bolt for a particular type of flange. It has the following attributes:
|
|
•
|
BLTA - the Bolt Table is an administrative element.
|
|
•
|
BLIS - the Bolt List is an administrative element which groups together Standard Bolt (SBOL) elements.
|
|
•
|
SBOL - the Standard Bolt element. This has the attributes:
|
|
•
|
LTAB - the Length Table holds a number of Diameter Tables.
|
|
•
|
DTAB - the Diameter Table stores information on standard bolt lengths, held as a string of values in its BLEN attribute. DTAB is accessed from the NSTD attribute of the SBOL element.
|
