HUBLOCATION (Global Project Administration - Hub only)

Administrator Command Reference Manual

Command Details : Detailed Descriptions of Commands : HUBLOCATION (Global Project Administration - Hub only)

HUBLOCATION (Global Project Administration - Hub only)

Relocate Project Hub.

The specified Location becomes the new Hub.

The Location which will become the new Hub must have all DBs allocated to it using the ALLOCATE ALL... OVERRIDE PROPG command before the HUBLOCATION command is given. (The OVERRIDE PROPG option makes sure that non-propagating databases, including transaction databases are allocated to the new hub)

You may also wish to give a SYNCHRONISE command at the Location which will become the Hub to bring the databases up-to-date. You are advised to backup the Global database at the Hub before issuing this command.

The relocation can be deferred until a given time (for online Locations only).

Note:

Before you give this command, the new Hub Location must have a locally administered System database, and all constructor databases must be allocated to it (see above). You must wait for the operation to complete: see the Global User Guide for more information on Hub administration.

If a HUBLOCATION command fails, the previous Hub will normally be recovered automatically. If the recovery fails (for example, the daemon is not running), you can recover the previous Primary location using the command:

Use of the PREVOWN command should be avoided if possible.


HUBLOCATION LON Relocates the Hub to location with identifier LON. HUBLOCATION LON AT 20:00 Relocates the Hub to location with identifier LON at 2000 hrs.

Command Syntax:


>--- HUBLOCation <loc> ---+-----------------. \| \| ‘--- AT <time> ---+--->

Related Commands:

PREVOWNER HUB, ALLOCATE ALL


>--- Q HUBRF --->

1974 to current year. AVEVA Solutions Limited and its subsidiaries. All rights reserved.