Limit Points

Schematic 3D Integrator User Guide

Administration : Limit Points

Integrator can display Limit Points on pipelines in the Diagram Viewer. These can be placed on the ends of elements and in schematic tubes, enabling the piping designer to decide how the pipeline will be divided up into multiple pipes in the 3D model.

These limit points are stored in the design database in an Integrator Limit Point World and are rendered on the diagram view when the P&ID is displayed. They are visible to other piping designers so each can see where the other has defined limit points.

Before limit points can be created on the P&ID’s, a hierarchy must be created first. At each project location where limit points are to be added a Limits Points World element must be created with write access.


Name	Enter a name for the Limit Points World
Description	Enter a description for the Limit Points World
DB	From the drop down list, select a database to store limits points
OK	Click to create the Limit Points World
Cancel	Click to discard any inputs and close the Create Limit Points World window.

The Limit Points World element is created in the Model Explorer. Limit Points can now be created on the currently selected diagram.