ISODRAFT User Guide

Using ISODRAFT	Provides an introduction to ISODRAFT and explains how to produce isometrics in the default format.
Catalogue Requirements	Gives a brief description of how the Catalogue database (except Bolt Tables) is structured; in particular, the parts which are essential for using ISODRAFT. Refer to Catalogue Database Structure for further information.
Bolting	Describes Bolt tables and how bolting requirements are calculated.
Design Requirements	Describes how piping components should be designed so that ISODRAFT can process the pipes correctly; in particular, how split points in pipelines are stored in the DESIGN database. Refer to Isodraft Database for further information.
Piping Components in ISODRAFT	Describes how piping components are drawn on isometrics.
Customise Drawing Sheet	Gives an overview of the commands used to customise the drawing sheet.
Material List and Other Reports	Gives an overview of the commands used to customise the material list, and explains how to produce other reports.
Isometric Drawing	Gives an overview of the commands used to customise the isometric drawing area.
Change Highlighting	Gives an overview of the process of marking changes made to drawings.
Symbol Keys	Describes how to modify the symbols (SKEYs) used to show piping components on isometrics, and how to create new ones.
ISODRAFT Transfer File	Describes the ISODRAFT SODRAW transfer file. This information may be required by advanced users.