ISODRAFT
Reference Manual
Alternative Texts
: Plotted Material List
Plotted Material List
300 ‘FABRICATION MATERIALS’
The heading for components whose SHOP attribute is set to TRUE and for pipe selected from a specification with a ?SHOP set to TRUE.
310 ‘ERECTION MATERIALS’
The heading for components whose SHOP attribute is set to FALSE and for pipe selected from a specification with no ?SHOP or with a ?SHOP set to FALSE.
301 ‘PT’
The part number pointer, used in conjunction with Atext 302.
302 ‘NO’
Used in conjunction with Atext 301.
303 ‘COMPONENT DESCRIPTION’
The sub-heading for the item description column.
304 ‘N.S.’
Denotes nominal size (bore) of a pipe or component.
305 ‘ITEM CODE’
The sub-heading for the item code column.
306 ‘QTY’
Denotes quantity.
307 ‘PIPE’
The sub-heading under which pipe is listed.
308 ‘FITTINGS’
The sub-heading under which pipe fittings (elbows, tees etc.) are listed.
309 ‘FLANGES’
The sub-heading under which flanges are listed.
311 ‘GASKETS’
The sub-heading under which gaskets are listed.
312 ‘BOLTS’
The sub-heading under which bolts are listed.
313 ‘VALVES / IN-LINE ITEMS’
The sub-heading under which valves and in-line items are listed.
314 ‘INSTRUMENTS’
The sub-heading under which instruments are listed.
315 ‘SUPPORTS’
The sub-heading under which supports are listed.
339 ‘MISCELLANEOUS COMPONENTS’
The sub-heading under which additional items are listed.
316 ‘PIPE SPOOLS’
The sub-heading under which spool numbers are listed.
319 ‘CUT PIPE LENGTHS’
The heading under which cut pipe lengths are listed.
320 ‘PIECE’
The sub-heading to Atext 319 which identifies individual cut pipe lengths. Used in conjunction with Atext 321.
321 ‘NO’
Used in conjunction with Atext 320.
322 ‘CUT’
The sub-heading to Atext 319 which indicates the actual lengths of the cut pipes listed. Used in conjunction with Atext 323.
323 ‘LENGTH’
Used in conjunction with Atext 322.
324 ‘REMARKS’
The sub-heading to Atext 319 under which Atexts 326, 327, or 328 will be listed if applicable.
326 ‘PLD BEND’
Listed under Atext 324 if a cut pipe length contains a pulled bend.
327 ‘LOOSE FLG’
Listed under Atext 324 if a cut pipe length contains a loose flange.
328 ‘FF WELD’
Listed under Atext 324 if a cut pipe length contains a fitted field weld.
334 ‘S’
Used with fixed length piping. This Atext is appended to the item code when one end of a fixed length spool has a special flange.
335 ‘WITH SPECIAL RATING FLANGE(S) (Refer to ISO)’
Used with fixed length piping. This Atext is appended to the description. Used in conjunction with Atext 334.
341 ‘EQUIPMENT TRIM MATERIALS’
Used as a heading for material lists in equipment trim isometrics.
342 ‘NOZZLE REF -’
Used as a subheading for each group of components related to a particular Nozzle in an equipment trim MTO list.
343 ‘CONTINUED’
Indicates that the listing for a Nozzle in an equipment trim isometric is continued from a previous drawing sheet.
345 ‘AND’
Used to separate parts of an equipment trim MTO list between connected Nozzles.
346 ‘GEARBOX ORIENTATION’
Used for all valves created with a P11 to show the orientation of P11.
347 ‘ ’
This Atext is blank by default. It is used to set text at the bottom of the material list on the master drawing to show that the information is continued on another sheet. If it is defined, it will override the standard Atexts 209, 255 and 256.
348 ‘ ’
This Atext is blank by default. It is used to set text at the top of the material list on an overflow drawing to show that the information is continued on another sheet. If it is defined, it will override the standard Atexts 276, 255 and 256.
350 ‘REDUCING ELBOW’
The subheading under which reducing elbows are listed.
Note:
This text is also used in the drawing area.
371' TOTAL FABRICATION WEIGHT'
Used for total weight line1
372' TOTAL ERECTION WEIGHT'
Used for total weight line2
373' TOTAL WEIGHT'
Used for total weight line3
377 ‘PLD TEE’
The entry in the REMARKS column of the cutting or material list for tube pieces including pulled tee.
378 ‘SETON TEE’
The entry in the REMARKS column of the cutting or material list for tube pieces including set-on tee.
480 ‘SPOOL’
This Atext is used in headings to show the spool number.
481 ‘NO SPOOL’
This Atext is used in headings for components which are not included in any spool.
1974 to current year.
AVEVA Solutions Limited and its subsidiaries. All rights reserved.
