HVAC
HVAC Window : Orientation
Use the Orientation part of the HVAC window to modify the Leave Direction and Leave ‘A’ Axis of an existing HVAC component.
Select the element to modify, from either the Model Explorer or the 3D View. In the example below a Rectangular Straight is highlighted in the Model Explorer.
After selecting the element in the Model Explorer or 3D View, click CE to display the current orientation of the CE:
Input the required direction in the Leave Direction and/or Leave ‘A’ Axis fields. Then press Enter on the keyboard, the orientation of the CE will be updated with the input(s) in the 3D View.
|
Sets the Leave Direction for a piece of HVAC. Valid directions are E (East), N (North), U (Up), -E (negative East), -N (negative North) or -U (Negative Up).
|
|
|
Sets the rotation of the piece of HVAC relative to the Leave Direction. Valid dimensions are E (East), N (North), U (Up), -E (negative East), -N (negative North) or -U (Negative Up).
|
