HVAC
Components : Inline Plant Equipment : Circular Control Damper
Select Inline Plant Equipment in the Categories drop-down list and then CIRCULAR, Control Damper in the Available Type drop-down list to display the Control Damper window:
|
•
|
To visualise how the dimensions equate to the actual piece of HVAC, click Picture to display a detailed drawing for Circular Control Damper.
|
Note:
|
Specify a type of joint to use for the Arrjoint (Arrive Joint) and Leajoint (Leave joint). Refer to Create/Modify HVAC Component for a detailed description.
After selecting the type of joint to use for the Arrive Joint and Leave Joint you must enter the Handle Direction.
In the Handle Direction specify the axis that should be used. Valid axes are E (East), N (North), U (Up), -E (negative East), -N (negative North) or -U (Negative Up).
The Clash Vol fields will be pre-populated with the obstruction volumes associated with the rectangular flanged FD component and the ducting, but can be changed by you.
|
•
|
|
•
|
Click Unchanged (default when Modify is selected) - positions the component at the co-ordinates 0.00.
|
|
Note:
|
Unchanged is usually used, when Modify is selected, it does not connect the component but positions it at 0.00, in effect in a floating position.
|
Click Fit to orientate the Control Damper to automatically match the outlet (p-leave) of the previous piece of HVAC to the inlet (p-arrive) of the next piece.
Click OK to create the Control Damper component and close the Control Damper Window. You will be returned to the HVAC Window.
