HVAC
Components : Branch Connectors : Circular Square-Round c
Select Branch Connectors in the Categories drop-down list and then CIRCULAR, Square-Round c in the Available Type drop-down list to display the SQRD Brconnector window:
To visualise how the dimensions equate to the actual piece of HVAC, click Picture to display a detailed drawing for Circular Square.
|
Note:
|
The fields will be pre-populated with default dimensions. These dimensions are governed by the details defined in the HVAC Catalogue. The Circle Extension default is auto but can be changed by you to a required dimension. The Fixing to Duct joint default is joint defined in the HVAC Catalogue but can be changed by you to the required joint.
|
Click Transpose Width/Depth to exchange Square Width dimension with Square Depth dimension or to exchange MAIN Width LA dimension with MAIN Depth LB dimension.
Specify a type of joint to use for the Branch Connector Joint. Refer to Create/Modify HVAC Component for a detailed description.
After selecting the type of joint to use for the Branch Connector Joint, you must enter the Branch Connector Direction.
In Branch Connector Direction specify axis that should be used. Valid axes are E (East), N (North), U (Up), -E (negative East), -N (negative North) or -U (Negative Up).
|
•
|
|
•
|
Click Unchanged (default when Modify is selected) - positions the piece of HVAC at the co-ordinates 0.00.
|
|
Note:
|
Unchanged is usually used, when Modify is selected, it does not connect the piece of HVAC but positions it at 0.00, in effect in a floating position.
|
Click Fit To Next to orientate the Square - Round Branch Connector to automatically fit this piece of HVAC to the next piece.
Click OK to create the Square - Round Branch Connector component and close the SQRD Brconnector Window. You will be returned to the HVAC Window.
