HVAC
Components : Transformations : Oval>Rect Spigot Plate
Select Transformations in the Categories drop-down list and then Oval>Rect Spigot Box in the Available Type drop-down list to display the Spigot Plate window:
|
•
|
|
•
|
To visualise how the dimensions equate to the actual piece of HVAC, click Picture to display a detailed drawing for Flat Oval to Rectangular Spigot Box.
|
Note:
|
Click Transpose Width/Depth to exchange Oval Width AA dimension with Oval Depth AB dimension or to exchange Rectangle Duct Width dimension with Rectangle Duct Depth dimension.
Specify a type of joint to use for the Oval Joint and Rectangle Joint. Refer to Create/Modify HVAC Component for a detailed description.
After selecting the type of joint to use for the Oval Joint and Rectangle Joint you must enter the A Offset Direction.
In A Offset Direction enter the direction for the A Offset. Valid directions are E (East), N (North), U (Up), -E (negative East), -N (negative North) or -U (Negative Up).Using the Flip Rectangle / Oval drop-down list, you can choose whether to flip the direction of arrive and leave of the of the piece of HVAC, 180° relative to the point of origin.
|
•
|
|
•
|
Click Unchanged (default when Modify is selected) - positions the piece of HVAC at the co-ordinates 0.00.
|
|
Note:
|
Unchanged is usually used, when Modify is selected, it does not connect the piece of HVAC but positions it at 0.00, in effect in a floating position.
|
Click Fit to orientate the Spigot Plate to automatically match the outlet (p-leave) of the previous piece of HVAC to the inlet (p-arrive) of the next piece.
Click OK to create the Spigot Plate component and close the Spigot Plate Window. You will be returned to the HVAC Window.
