HVAC
Components : Flat Oval : Saddle
Select Flat Oval in the Categories drop-down list and then Saddle in the Available Type drop-down list to display the Saddle window.
To visualise how the dimensions equate to the actual piece of HVAC click Picture to display a detailed drawing for Saddle.
|
Note:
|
The fields will be pre-populated with default dimensions. These dimensions are governed by the details defined in the HVAC Catalogue. The Fixing to Duct joint default is joint defined in the HVAC Catalogue but can be changed by you to the required joint.
|
You can also select a standard stock access panel, using Select Size drop-down list, the Saddle Overall Width and Saddle Overall Height fields are populated with the standard sizes.
Click Transpose Width/Depth to exchange Saddle Overall Width dimension with Saddle Overall Height dimension or to exchange MAIN Width LA dimension with MAIN Depth LB dimension.
In Saddle Direction specify the axis to be used. Valid axes are E (East), N (North), U (Up), -E (negative East), -N (negative North) or -U (Negative Up).In the Position list, select Connect or Unchanged:
|
•
|
|
•
|
Click Unchanged (default when Modify is selected) - positions the component at the co-ordinates 0.00.
|
|
Note:
|
Unchanged is usually used, when Modify is selected, it does not connect the component but positions it at 0.00, in effect in a floating position.
|
Click Fit To Next to orientate the Saddle to automatically match the outlet (p-leave) of the previous piece of HVAC to the inlet (p-arrive) of the next piece.
Click OK to create the Saddle component and close the Saddle Window. You will be returned to the HVAC Window.
