HVAC

Components : Flat Oval : ‘B’ Plane Mitred Elbow
The task of creating an HVAC Component is initiated from the HVAC Window.
Select Flat Oval in the Categories drop-down list and then ‘B’ Plane Mitred Elbow in the Available Type drop-down list to display the ‘B’ Plane Elbow window:
Click Transpose Width/Depth to exchange Duct Width AA dimension with Duct Depth AB dimension.
Specify a type of joint to use for the Arrive Joint and Leave Joint. Refer to Create/Modify HVAC Component for a detailed description.
After selecting the type of joint for the Arrive Joint and Leave Joint you must enter the Leave Direction.
In Leave Direction specify the Axis that should be used. Valid axes are E (East), N (North), U (Up), -E (negative East), -N (negative North) or -U (Negative Up).
In the Position list, select Connect or Unchanged:
Click Connect (default when Create is selected) - connects the piece of HVAC to the previous one.
Click Unchanged (default when Modify is selected) - positions the component at the co-ordinates 0.00.
Note:
Unchanged is usually used, when Modify is selected, it does not connect the component but positions it at 0.00, in effect in a floating position.
Click Defaults to reset all the fields back to when the ‘B’ Plane Elbow window was opened.
Click Fit to orientate the ‘B’ Plane Elbow component to automatically match the outlet (p-leave) of the previous piece of HVAC to the inlet (p-arrive) of the next piece.
Click OK to create the ‘B’ Plane Elbow component and close the ‘B’ Plane Elbow Window. You will be returned to the HVAC Window.
Click Cancel to discard all field changes and close the ‘B’ Plane Elbow window.

1974 to current year. AVEVA Solutions Limited and its subsidiaries. All rights reserved.
AVEVA Logo