HVAC
Components : Circular : Radiused Threeway
Select Circular in the Categories drop-down list and then Radiused Threeway in the Available Type drop-down list to display the Radiused Threeway window:
|
•
|
|
•
|
|
•
|
To visualise how the dimensions equate to the actual piece of HVAC, click Picture to display a detailed drawing for Radius Threeway.
|
Note:
|
The fields will be pre-populated with default dimensions. These dimensions are governed by the details defined in the HVAC Catalogue. The Arrive and Leave Extension default is auto but can be changed by you to a required dimension.
|
Specify a type of joint to use for the Arrive Joint, Leave Joint and Branch Joint. Refer to Create/Modify HVAC Component for a detailed description.
After selecting the type of joint to use for the Arrive Joint and Leave Joint you must enter the Leave Direction.
In the Leave Direction specify the axes that should be used. Valid axes are E (East), N (North), U (Up), -E (negative East), -N (negative North) or -U (Negative Up).
Using the Flip Arrive/Leave drop-down list, you can choose whether to flip the direction of arrive and leave of the of the piece of HVAC 180° relative to the point of origin.
|
•
|
|
•
|
Click Unchanged (default when Modify is selected) - positions the component at the co-ordinates 0.00.
|
|
Note:
|
Unchanged is usually used, when Modify is selected, it does not connect the component but positions it at 0.00, in effect in a floating position.
|
Click Fit to orientate the Radiused Threeway to automatically match the outlet (p-leave) of the previous piece of HVAC to the inlet (p-arrive) of the next piece.
Click OK to create the Radiused Threeway component and close the Radiused Threeway Window. You will be returned to the HVAC Window.
