HVAC
Components : Rectangular : Weather Skirt
Weather Skirt
The task of creating an HVAC Component is initiated from the HVAC Window.
Select Rectangular in the Categories drop-down list and then Weather Skirt in the Available Type drop-down list to display the Weather Skirt window:
You are required to input the following dimensions:
•
Skirt Width AA
•
Skirt Depth AB
•
Duct Width LA
•
Duct Depth LB
•
Distance from Leave
•
Height
•
A Offset
•
B Offset
•
First Extension
•
Last Extension
To visualise how the dimensions equate to the actual piece of HVAC, click Picture to display a detailed drawing for Weather Skirt.
Note:
The fields will be pre-populated with default dimension. These dimension are governed by the details defined in the HVAC Catalogue.
In the A Offset Direction enter the direction for the A Offset relative to the Point of Origin. Valid directions are E (East), N (North), U (Up), -E (negative East), -N (negative North) or -U (Negative Up).
In the Position list, select Connect or Unchanged:
•
Click Connect (default when Create is selected) - connects the piece of HVAC to the previous one.
•
Click Unchanged (default when Modify is selected) - positions the component at the co-ordinates 0.00.
Note:
Unchanged is usually used, when Modify is selected, it does not connect the component but positions it at 0.00, in effect in a floating position.
Click Defaults to reset all the fields back to when the Weather Skirt window was opened.
Click Fit to Next to orientate the Weather Skirt to automatically match the outlet (p-leave) of the previous piece of HVAC to the inlet (p-arrive) of the next piece.
Click OK to create the Weather Skirt component and close the Weather Skirt Window. You will be returned to the HVAC Window.
Click Cancel to discard all field changes and close the Weather Skirt window.
1974 to current year. AVEVA Solutions Limited and its subsidiaries. All rights reserved.
AVEVA Logo