Set Leader Line Attributes (GLABs) . . .

DRAW Reference Manual

Labels : Summary of Commands : Set Leader Line Attributes (GLABs) . . .


LEAD option	set leader line visibility - sets LEAD TRUE/FALSE. option = ON or OFF.
LTER option	sets leader line terminator. options: OFF, ARR, DOT, OBLIQUE
LEAD STRA	sets a bent leader line to straight
TSIZ 4	set terminator size to 4mm (default 3mm)
LEAD BENT @	bend a leader line at a position set by cursor (@ @ for two bend points)
LEAD BENT AT @ OFFSET Y50	bend leader line at an offset from a position set by the cursor
LEAD BENT CENTRE OF /CIRC1	bend a leader line at the centre of the named circle
LEAD BENT OFFS X value Y value	bend a leader line at a position explicitly (repeat X value Y value for two bend points)
LEAD BENT PT 2 @	specify 2nd of two bend points using cursor
LEAD BENT PT 2 X722 Y40	specify 2nd of two bend points explicitly
LEAD BENT PT 1 OFF X15	specify 1st of two bend points as offsets from Label attachment point
LEAD BENT PT 1 DEL	delete 1st of two bend points
LEAD value option	bend a leader line at an angle then horizontal or vertical. option = HORI or VERT
LEAD option value	bend a leader line horizontal or vertical then at an angle option = HORI or VERT
LEAD CLEA ENDP OF /LINE1 QUAL X500 Y500	sets leader line clearance using a constructed point
APOF value value	offsets attachment point from DDNM (Sheet units)
LEAD ATTA X value Y value LEAD ATTA @	specify attachment point offset explicitly
LEAD ATTA X value Y value LEAD ATTA @	specify attachment point offset explicitly	LEAD ATTA DELETE APOF 0 0 APOF UNSET	remove attachment point offset
CPOF STAN	places leader line connection point at standard position
CPOF ORIG	places leader line connection point at Label origin
CPOF value value	allows a relative position to be specified