Model Reference Manual
Data Consistency Checking
:
Minimum Tube and Rod Lengths and Maximum Bend Angles
: Specifying Maximum Angles for Bends and Elbows
Specifying Maximum Angles for Bends and Elbows
Keywords:
MAXANGLE
Description:
The design angle for each pulled bend or elbow, taken from the setting of its ANGL attribute, is checked against a predefined maximum angle. A diagnostic message is output if the design angle is too large.
The default setting for the maximum permitted angle is 90°, but the user may specify any limit within the range 0° (i.e. straight tube only) to 180° (i.e. U-bends allowed).
Example:
MAXANGLE 45
Command Syntax:
>--- MAXANGLE ---
value
--->
Querying:
Q MAXANGle
1974 to current year.
AVEVA Solutions Limited and its subsidiaries. All rights reserved.
