Model Reference Manual
Data Consistency Checking
:
Minimum Tube and Rod Lengths and Maximum Bend Angles
: Specifying Minimum Lengths Irrespective of Bore
Specifying Minimum Lengths Irrespective of Bore
Keywords:
TOLERANCE TUBE
Description:
The TUBE command, used alone, specifies the minimum acceptable tube length which is applicable to all tube diameters which have not been more specifically set.
Examples:
TOL TUBE 100
(Default)
Minimum acceptable length is 100 mm
TOL TUBE DEFAULT
Minimum acceptable length is 100 mm
TOL TUBE 6 INCH
Minimum acceptable length is 6 inches
Command Syntax:
>-- TOLerance TUbe --+-- <uval> ---.
| |
‘-- DEfault --+-->
Querying:
>-- Query TUbe -->
>-- Query TOLerance OPTions -->
(also outputs ATTACHECK and misalignment settings; refer to
Checking Parts of the Design
and
Piping/Hangers
, respectively)
1974 to current year.
AVEVA Solutions Limited and its subsidiaries. All rights reserved.
