Checking Parts of the Design

Model Reference Manual

The CHECK command initiates a full Component-by-Component data consistency check of specified parts of the Design. Up to 10 elements may be specified in a single CHECK command.

ATTAs will be checked in the same way as normal components if the ATTACHECK ON option is in force. They will be ignored if ATTACHECK OFF is in force.

To store error references and (optionally) error codes in PML arrays, if required. The ENHANCE command can be used to highlight the problems on the display. Refer to Software Customisation Guide for more information on PML and arrays.


Examples:
CHECK /ZONE-1	Generates full consistency report on every component in the named Zone
CHECK /BRAN1 /BRAN2 /BRAN3	Generates selective report on the named Branches only
TOL ATTACHECK OFF	ATTAs will be ignored in subsequent checks

Command Syntax:

              .----<-----.
             /           |
>-- CHeck --*-- <sgid> --+-- <varid1> -- [<varid2>]--.
                         |                           |
                         ‘---------------------------+---->

>-- TOLerance ATTACheck --+-- ON* --.
                          |         |
                          ‘-- OFf --+-->

Where <varid1> is the PML array used to store references of any elements with errors, and the (option) <varid2> is the array that stores the error codes.

Querying:

>-- Query TOLerance ATTACheck -->