Model Reference Manual
Automatic Pipe Routing
:
Refining the Automatic Pipe Routes
: Defining the Direction of Spread
Defining the Direction of Spread
Keywords:
SDIR
Description:
The spread direction is the direction in which the pipes will be spread laterally when they are ordered along the rack. The default position from which the pipes are spread is the centre of the PVOL. This may be changed to the side of the PVOL by adding the parameter FROMSIDE to the command.
Examples:
SDIR
E
Sets the spread direction to be East about the centre of the PVOL
SD
N FR
Sets the spread direction to be North, starting from the south side of the PVOL
SD
N AB
As above, but pipes to be spread about centre of rack
Note:
If no spread direction is specified, the default is taken as the direction of the second largest side of the PVOL
Command Syntax:
>-- SDir <bdir> --+-- FRomside -----.
| |
|-- ABoutcentre --|
| |
‘-----------------+-->
1974 to current year.
AVEVA Solutions Limited and its subsidiaries. All rights reserved.