Model Reference Manual
Automatic Pipe Routing
:
Pipe Routing
: Setting the Nozzle Offset Factor
Setting the Nozzle Offset Factor
Keywords:
OFFSETFACTOR
Description:
Branches which are routed from Nozzles have default Routing Planes a set distance away from the Nozzle. This is to allow a sensible pipe length between the Nozzle and the first change of direction. The default value for this offset is three times the bore of the associated nozzle, and is input in the same terms. For example, a value of 4 would mean that the offset would be four times the Nozzle bore.
Example:
OFFSET 5
Sets the offset to be five times the bore of its associated Nozzle.
Command Syntax:
>-- OFFSETfactor
integer
-->
Querying:
>-- Query OFFSET -->
1974 to current year.
AVEVA Solutions Limited and its subsidiaries. All rights reserved.
