Component Arrive and Leave Attributes

Model Reference Manual

Piping, Ducting and Cable Trays : Standard Component Attributes : Component Arrive and Leave Attributes

Component Arrive and Leave Attributes

This command sets the attributes that control which p-points are the Arrive and Leave for a Component. It is usual to set those attributes before Selection and Positioning as they can define:

•

The automatic Selection Parameters for that item (particularly REDUCERS)

•

The centreline Logical Route that will affect positioning and orientation of the Component.

However, as the p-point details for Arrive (PA) and Leave (PL) are obtained from the Catalogue, these may only be used or interrogated after Selection.


Example:
ARR 2 LEAV 1	The Logical Route will Arrive at P2 and Leave at P1 of the Component.
ARR 3 LEAV 2	The Logical Route will Arrive at P3 and Leave at P2 of the Component.

Note:

Default is Arrive 1, Leave 2.

Command Syntax:

>--+-- ARRive --.
   |            |
   ‘-- LEAve ---+-- P --------.
                |             |
                ‘-- integer --+-->

1974 to current year. AVEVA Solutions Limited and its subsidiaries. All rights reserved.