Data Model Reference Manual

Name	Name of the element
Description	Description of the element
ManCog	Center of gravity
DimTxt	Dimensions text
FncCd	Functional description code
FncTxt	Functional description
ManTyp	Manufactured type for example. Plane, Curved,...
MouLen	Mould length
PanSid	Side of panel
Parm	Parameters
PosNo	Position number
PrtIdl	Long part id
PrtIds	Short part id
PrtLst	Parts list name
PtpTxt	Profile type. for example. Stiffener, Flange,...
QuaCd	Quality code
QuaTxt	Quality
ShpSym	Shape symbol text
TotLen	Total Length
TypeCd	Type code
TypeCe	Type code
ManWgh	Weight
Uuid	Universally unique identifier
OrdRef	Order reference
AnyCha	True if chamfer is defined on any edge
Bent	Bent flag
BPType	Basic Profile Type
Curved	True if curved plate part.
EdgGrd	True if any edge should be grinded
HolGrd	True if any hole in the part should be grinded
Midrho	Minimum diameter of drilled holes
Mieang	Minimum angle for edge preparation
Mifang	Minimum end cut angle flanges
Miwang	Minimum end cut angle web
Mxdrho	Maximum diameter of drilled holes
Mxeang	Maximum angle for edge preparation
Mxfang	Maximum end cut angle flanges
Mxwang	Maximum end cut angle web
Prcuho	True if profile has holes to be cut in this surface
Prcuto	True if profile has cutouts in this surface
Prdrho	True if profile has drill holes in this surface
Prlbl	True if profile has labels defined in this surface
Prmrk	True if profile has marking defined in this surface
Prnot	True if profile has notches in this surface
Prsiho	True if profile has sink holes in this surface
Prslho	True if profile has slotted holes in this surface
Prthho	True if profile has threaded holes in this surface
TotLen	Total manual length
EPREPV	True if V-bevel
EPREPY	True if Y-bevel
EPREPX	True if X-bevel
FulLen	Total length of manufactured profile
NMark	Number of markings
Ngsd	Number of GSDs
NLbl	Number of labels
NCHole	Number of cut holes
NMkHol	Number of marked holes
NDHole	Number of drilled holes
NSlHol	Number of slot holes
NTHole	Number of threaded holes
NSiHol	Number of sink holes
NNotch	Number of notches
NCutou	Number of cutouts
NDDrHo	Number of different diameters of drilled holes
NSSlHo	Number of different sizes of slot holes
BrnLen	Length of burning contours
CLHole	Cutting length holes
CLNotc	Cutting length notches
CLCuto	Cutting length cutouts
CLEib	Cutting length end, no bevel or butt
CLEvb	Cutting length end, V bevel
CLEyb	Cutting length end, Y bevel
CLExb	Cutting length end, X bevel
CLGrnd	Total grinding length
TLVBev	Profile trace length, V bevel
TLYBev	Profile trace length, Y bevel
TLXBev	Profile trace length, X bevel
MrkLen	Total marking length
Prmkho	True if profile has holes to be marked in surfaces
Michoa	Minimum area of cut holes
EprepC	True if Varying bevel