Data Model Reference Manual

Name	Name of the element
Description	Description of the element
AnyCha	True if chamfer is defined on any edge
AsPart	True if assembly part.
AsPlno	Number of assembly plate parts
AsPrno	Number of profiles on assembly part
AsPwle	Total length of weld in assembly part
Bent	Bent flag
BlsLen	Length of blasting contours
BrnLen	Length of burning contours
ManCog	Center of gravity
Corrug	True if corrugation is defined on the plate part
CrcAng	Turning angle for least circumscribed rectangle
CrcLw	Length and width of least circumscribed rectangle
Curved	True if curved plate part.
DatInt	Date
DatTxt	Date
Dest	Destination
FncCd	Functional description code
FncTxt	Functional description
Folded	True if folded
HolGrd	True if any hole in the plate should be grinded
Knuckl	True if knuckled
ManTyp	Manufactured type for example. Plane, Curved,...
MrkLen	Total marking length
PanSid	Side of panel
PlArea	Area
PlaTyp	Type of plate for example. Plate, Bracket, Clip,...
PosNo	Position number
ProSid	Plate side with most profile markings
PrtIdl	Long part id
PrtIds	Short part id
PrtLst	Parts list name
QuaCd	Quality code
QuaTxt	Quality
SdtTxt	Splitting date
Streat	Surface treatment
Thickn	Thickness
TypeCd	Type code
TypeCe	Type code
ManWgh	Weight
Uuid	Universally unique identifier
OrdRef	Order reference
EdgGrd	True if any edge should be grinded
Midrho	Minimum diameter of drilled holes
Mieang	Minimum angle for edge preparation
Mxdrho	Maximum diameter of drilled holes
Mxeang	Maximum angle for edge preparation
Plcuho	True if plate has holes to be cut
Pldrho	True if plate has holes to be drilled
Pllbl	True if plate has labels defined
Plsiho	True if plate has sink holes
Plslho	True if plate has slotted holes
Plthho	True if plate has holes to be threaded
EPREPV	True if V-bevel
EPREPY	True if Y-bevel
EPREPX	True if X-bevel
Plnot	True if plate has notches
Plcuto	True if plate has cutouts
NMark	Number of markings
Ngsd	Number of GSDs
NLbl	Number of labels
NCHole	Number of cut holes
NMkHol	Number of marked holes
NDHole	Number of drilled holes
NSlHol	Number of slot holes
NTHole	Number of threaded holes
NSiHol	Number of sink holes
NNotch	Number of notches
NCutou	Number of cutouts
NDDrHo	Number of different diameters of drilled holes
NSSlHo	Number of different sizes of slot holes
CLHole	Cutting length holes
CLNotc	Cutting length notches
CLCuto	Cutting length cutouts
CLEib	Cutting length end, no bevel or butt
CLEvb	Cutting length end, V bevel
CLEyb	Cutting length end, Y bevel
CLExb	Cutting length end, X bevel
CLGrnd	Total grinding length
Plmkho	True if plate has holes to be marked
Michoa	Minimum area of cut holes
Plmrk	True if plate has marking
EprepC	True if Varying bevel