Revolution Element (REVOLUTION)

Data Model Reference Manual

Design Database : Elements in Primitive Category : Revolution Element (REVOLUTION)

Revolution Element (REVOLUTION)

Primitive Element

The Solid of Revolution represents any shape which can be generated by sweeping a constant cross-section profile thought an angle about an axis. The profile is represented by a LOOP, in the same was as for an Extrusion, but in this case the profile is swept about an axis rather than along a linear path. The swept angle must but in the range -360 to +360 degrees, 360 degrees giving a solid which is axially symmetrical.


Name	Name of the element
Purpose	Description code word
Position	Position
Orientation	Orientation
Level	Drawing level
Obstruction	Obstruction level
Angle	Angle
Orrf	Origin reference (for templates)
Tmrref	Template Repeat Element Reference
RepCount	Rule Repeat Counter

Equipment Element (EQUIPMENT)

Cable Junction Box Element (JNTBOX)

Pipe Track Element (PTRACK)

Pulling Pit Element (PULLPIT)

Structure Element (STRUCTURE)

Subequipment Element (SUBEQUIPMENT)

Substructure Element (SUBSTRUCTURE)

Sub Volume Model Element (SVOLMODEL)

Template Element (TMPLATE)

Terrain Primitive Holder Element (TRNPRI)

Volume Model Element (VOLMODEL)

Loop Element (LOOP)

Negative Box Element (NBOX)

Negative Cone Element (NCONE)

Negative Circular Torus Element (NCTORUS)

Negative Cylinder Element (NCYLINDER)

Negative Dish Element (NDISH)

Negative Polyhedron Element (NPOLYHEDRON)

Negative Pyramid Element (NPYRAMID)

Negative Revolution Element (NREVOLUTION)

Negative Rectangular Torus Element (NRTORUS)

Negative Slope Bottom Cylinder Element (NSLCYLINDER)

Negative Snout Element (NSNOUT)

Negative Rectangular Extrusion Element (NXTRUSION)

1974 to current year. AVEVA Solutions Limited and its subsidiaries. All rights reserved.