Examples From Piping Component Specifications

Catalogues and Specifications Reference Manual

Typical Specifications : Selectors and Pointers for Piping Components : Examples From Piping Component Specifications

To keep the examples brief, very few lines (SPCOMs) are shown for each GTYPE.

NEW SPECIFICATION /RF300
MATREF =0
FLUREF =0
RATING 0.000
LINETYPE NUL

HEADING
TYPE  NAME    PBOR0  SHOP   CATREF   DETAIL  MATXT   CMPREF   BLTREF
   -     -       -      =
TUBE  */20TU  20.0   TRUE   /TUEE    /DTUB1  /MTUB     =0       =0
TUBE  */25TU  25.0   TRUE   /TUFF    /DTUB1  /MTUB     =0       =0
...

HEADING
TYPE  NAME    PBOR0  STYP  SHOP  CATREF   DETAIL  MATXT   CMPREF  BLTREF
-     -       -    PE      =
FTUB  */20FT  20.0   PE    TRUE  /FTEE    /DFTUB  /MFTUB    =0      =0
FTUB  */25FT  25.0   PE    TRUE  /FTFF    /DFTUB  /MFTUB    =0      =0
...

HEADING
TYPE  NAME    PBOR0  RADI  ANGL  SHOP  CATREF DETAIL   MATXT   CMPREF BLTREF
-     -       -      -     =     =
BEND  */20VB1 20.0   100.0 90.0  TRUE  /VBEE  /DVBEND1 /MVBEND   =0     =0
BEND  */20VB3 20.0   100.0 180.0 TRUE  /BEEE  /DBEND1  /MVBEND   =0     =0
BEND  */20VB2 20.0   60.0  90.0  TRUE  /VBEE  /DVBEND2 /MVBEND   =0     =0
BEND  */20VB4 20.0   60.0  180.0 TRUE  /BEEE  /DBEND2  /MVBEND   =0     =0
BEND  */25VB1 25.0   125.0 90.0  TRUE  /VBFF  /DVBEND1 /MVBEND   =0     =0
...

HEADING
TYPE  NAME    PBOR0  CATREF   DETAIL   MATXT   CMPREF  BLTREF
GASK  */20G   20.0   /GAEE    /DGASK   /MGASK    =0      =0
GASK  */25G   25.0   /GAFF    /DGASK   /MGASK    =0      =0
...

HEADING
TYPE NAME PBOR1 PBOR2 STYPE SHOP CATREF DETAIL MATXT CMPREF BLTREF
- - - - CONC =
REDU */25RC1 25.0 20.0 CONC TRUE /RCFE /DRED.C /MRED =0 =0
REDU */25RE1 25.0 20.0 ECC TRUE /REFE /DRED.E /MRED =0 =0
REDU */32RC1 32.0 25.0 CONC TRUE /RCGF /DRED.C /MRED =0 =0
REDU */32RE1 32.0 25.0 ECC TRUE /REGF /DRED.E /MRED =0 =0
...

and so on.

(See Figure 11:3.: Part of a typical Specification for piping components for some other examples.)