Schematic Model Manager
User Guide
Line List Configuration : LLENTRY Configuration : Create LLENTRY Component Rules
In the End Condition field, select which end conditions the rule will apply to (i.e. the rule will only apply to SCBRANCHs or BRANCH's with the selected end condition). Select from the following:
|
•
|
Any - rule applies to all SCBRANCHs or BRANCHs regardless of whether the HREF or TREF attributes of those SCBRANCHs or BRANCHES has been set.
|
|
•
|
Valid HREF/TREF - rule only applies to SCBRANCHs or BRANCHES with the HREF or TREF attributes set.
|
|
•
|
HREF/TREF unset - rule only applies to SCBRANCHs or BRANCHES with the HREF or TREF attribute not set. The HREF and TREF attributes define the start and end components of an SCBRANCH or BRANCH. In the Item Types field, select which category of component, i.e. the SCTYPEs or TYPE, to which the rule applies. For example, SCFITTING.
|
To select the SCTYPEs or TYPEs, click the ... option at the end of the field. The Select Values dialog is then displayed. For details of this dialog, refer to Create Attribute Mapping Groups. The selected SCTYPEs or TYPEs are listed below the Item Types field.
Enter the name of the rule in the Name field. In the Attribute Filters section, specify which end component attributes are to result in a SCBRANCH being excluded. For example, if SCBRANCHs that have end caps as their end component are to be excluded, the following rule could be set up:
